SENSOR & SAFETY DEVICE

Domestic Application

Multi Function Mold Detector

Domestic Application

Multifunctional Load Monitoring System
RLG-2/4

Multiple alarm functions incorporated high
performance automatic Load Monitoring System
RLG has the function of detecting the press load with
a strain gauge. It displays the accurate load during
press processing, and output stop signals and stops a
press machine immediately when abnormality is
detected. Multiple detection modes incorporated
cannot be ignored when there are eccentric loads for
each stroke, and furthermore, load monitoring
extends the life of dies, prevents friction and wear of
presses, also promotes quality control and rationalization.

Domestic Application

4-Channel Load Monitoring System
PLA-4N Stage2

PLA-4N Stage2 has the function of detecting the press load
with four(4) pieces of strain gauge sensors. It displays the
accurate load during press processing, and output stop
signals and stops a press machine immediately when
abnormality is detected. Monitoring cannot be ignored
when there are eccentric loads for each stroke, and
furthermore, load monitoring extends the life of dies,
prevents friction and wear of presses, also promotes
quality control and rationalization.

Domestic Application

2-Channel Load Monitoring System
PLA-2N Stage2

Never fail to catch the eccentric load, the necessities
of the quality control
PLA-2N Stage2 has the function of detecting the
press load with two(2) pieces of strain gauge sensors.
It displays the accurate load during press processing,
and output stop signals and stops a press machine
immediately when abnormality is detected. Monitoring
cannot be ignored when there are eccentric loads for each
stroke, and furthermore, load monitoring extends the life
of dies, prevents friction and wear of presses, also
promotes quality control and rationalization.

Domestic Application

Strain Monitoring Die Protection System
RDM-4

Only to press the setup button, RDM sets the best
monitoring range automatically.
RDM is epochal new product designed and developed
to make precise detection for slug by jamming die
hitherto difficult to detect. The unit checks delicate
changes accurately at a time slug is produced or other
changes occur and stop the press machine promptly.
An analog wave form produced at each stroke of the
press machine is detected by a sensor mounted on the
frame of the press machine and operationally processed
with a built-in microcomputer to ascertain right or wrong.
using with our slug detector MICRON-3, more effective
detection is available.

Domestic Application

Programmable Rotary Cam Switch
PCS-12

To promote automation, laborsaving and producing high
quality products, positioning detection, especially angle
detection is very important, and additionally, high precision,
certainty and high operability are required for producing
high quality products. Our PCS-12 has all requirements.
Installs a sensor on the revolving cam shaft of the press
machine, and decides the reference point, then sets the
operating position dialogically by the LCD monitor.
(It can be set at 1 degree.) By the incorporated
microcomputer, when the revolving cam shaft reaches to
the reference point, PCS-12 outputs ON/OFF signal.

Domestic Application

Multi-Channel Press Malfunction Detector
PMC-3

The Flagship model consolidating functions of
existing detectors.
Corresponds to various applications with the
condensed functions.
PMC-3 is the flagship model of our malfunction
detector, designed with collecting our know-how based
on a long years’ experience and high-end technologies,
and enhancing the further expandability with newly
adding large liquid crystal display unit. PMC-3N
features various new functions and high-operability
fully to meet diversified manufacturing process, and
also promote quality control and improvement of
productivity.

Domestic Application

Multi-Functional High Resolution Automatic Die Monitoring
System
MICRON-3

MICRON3 is a High Resolution Slug Detector for press
operation that monitors the position of bottom dead
center (BDC) every stroke using high performance proximity
sensor. Setting the upper and lower monitoring limits based
on the reference value calculated automatically by the
sampling, when the detected value exceed the monitoring
range, the device sends a stop signal immediately to the
press machine.
This device adapts Mean Value(Rolling Average) Monitoring
Method and Absolute Value(Bench Mark) Monitoring
Method, thus enable to perform more accurate and stable
detection.

Domestic Application

Stop-Time Measuring Device
SDM3

A requisite measuring system for the performance
diagnosing of the press machines.
Non-contact measurement is realized by adopting
magnetic sensor.